## Turbines moving the waters inside the Dome

Turbines are motors and the dome, in order to move, needs the most powerful of all motors.

Up to now, I have discussed the dome as being formed of two different rings:

1) a  stationary inner layer made of glass composites and having a positive charge;

2)  a moving exterior layer made up of crystals and silicates, negatively charged.

In the middle of the sandwich, there’s an interstice filled with water. It is a watery extension of 1110 kilometers that surrounds all the circle of the dome. So let’s recap. Between the inner, stationary layer, 6660 km thick, and the exterior moving ring of the dome, we have an impressive watery mass. 5550 kilometers is the thickness of the crystal external moving vault and 1110 kilometers is the expansion of the waters around the circle of the dome.  We have to understand that the first mobile is suspended and rotates over the surface of the 6660 kilometers of the watery chasm. Anyway, we can be sure, the earth below, negatively charged, is protected from the flooding of the upper waters. The inner glassy layer, 6660 kilometers thick, is performing that operation in complete security since unmemorable times. We don’t know what sort of gates are located on the exterior of the dome to prevent waters from dispersing in the outer vacuum. Magnetism should be implicated. You could possibly dare to think to a sort of change in p-branes dimensions as in the physics of strings!!!

So, it is really that watery inter-space that is the focus of the post you are reading today.

You could imagine the movement of the two rings of the dome around the earth as the movement of the rotor of a turbine mounted horizontally around a vertical stationary stator.

# What is a Turbine?

A turbine is a rotary mechanical device that extracts energy from a fast-moving flow of water, gas, air, or any fluid and converts it into useful work.

It is a turbomachine with at least one moving part called a rotor assembly, which is a shaft or drum with bucket-blades attached. Moving fluid acts on the blades so that they move and transmit the rotational energy to the rotor.

### Horizontal wheels

Horizontal wheels have a vertical axis, commonly called a tub wheel or Norse mill. The horizontal wheel is essentially a very primitive and inefficient form of the modern turbine. It is usually mounted inside a mill building below the working floor. A jet of water is directed onto the paddles of the water wheel, causing them to turn; water exits beneath the wheel, generally through the center. This is a simple system, usually used without gearing so that the vertical axle of the water wheel becomes the drive spindle of the mill.

### Wheels used in the modern times’ industry

The earliest water wheels in Calderdale (the historical textile industry district in West Yorkshire England UK) were undershot wheels which were placed directly in the stream. They were used mainly on rivers such as the Calder with a large quantity of water but without much fall.

The water wheels built in the late 18th and early 19th century were usually overshot or occasionally breast shot wheels. Because these wheels are turned by the weight of water, this meant that a relatively small stream could be used to turn some large water wheels.

Basic Types

Water wheels fall into one of two categories, which are defined by the plane of rotation of the wheel:

Horizontal, i.e. a wheel rotating about a vertical axis.

Vertical, i.e. a wheel rotating about a horizontal axis

http://www.powerinthelandscape.co.uk/water/water_wheels.html

The waterwheel concept is used in dams to generate electricity. Dams are some of the largest human-made structures on Earth. In fact, the Hoover Dam on the Colorado River in Nevada is 221 meters high, 379 meters long and 14 meters wide at the top. That is pretty big! It has 17 electric generators and provides electricity for about 500,000 homes in Nevada, Arizona, and California. The world’s largest hydroelectric power plant — the Itaipú Power Plant on the Paraná River in Brazil — provides energy to two countries (25% of Brazil’s electricity and 78% of Paraguay’s electricity).

The same concepts that are employed in a waterwheel are used in these gigantic hydroelectric power plants. A waterwheel is a simple turbine — a device with buckets, paddles or blades that is rotated by moving water, converting the kinetic energy of water into mechanical movement. Hydroelectric power plants use huge and more complex turbines to generate electricity.

### About the perpetual motion research

Let’s add a brief note about historical attempts to build the perpetual motion machine. Bhāskara’s wheel was invented in 1150 by Bhāskara II, an Indian mathematician, in an attempt to create a hypothetical perpetual motion machine. The wheel consisted of curved or tilted spokes partially filled with mercury. Once in motion, the mercury would flow from one side of the spoke to another, thus forcing the wheel to continue the motion, in constant dynamic equilibrium. (Wikipedia) Surfing on the web you could certainly find a lot of interesting videos and materials regarding this topic.

## A few additional historical notes

Since the antiquity water wheels were used for irrigation or for mills. Think, for instance, to sakias or norias.

In more recent times Poncelet invented a waterwheel that doubled the efficiency of existing undershot waterwheels through a series of detail improvements. The first Poncelet wheel was constructed in 1838, and the design quickly became common in France.  Although the design was a great improvement on existing designs, further improvements in turbine design rendered the Poncelet wheel obsolete by the mid-century.

The observations and subsequent modifications of the water wheel by Lester Pelton in the 1890’s set off the development of water turbines.  Today there are various designs of water turbines operating in modern hydroelectric dams around the world.  The Pelton impulse turbine continues to be used in both large and small-scale hydroelectric projects

So you could imagine the moving dome of the earth to be constructed as a sort of turbine having many blades attached to its shaft. Water will keep on continuously moving and energizing it.

## Squirrel Cage Motor

In addition to what has been previously explained, you could imagine the dome to be a sort of magnetic squirrel cage motor. Why?

We have already highlighted the fact that the earth is surrounded by a dome where, inside,  are set seven, probably electromagnetic, immaterial columns. One of them should be positioned inside and over the earth north pole and the others all around, in the inner, first stationary ring of the dome. So, the possibility is that over the top of the dome, inside the upper watery inter-space, there should be a second water turbine chamber, probably magnetically connected to the inferior one.

### A few technical notes about a squirrel cage rotor and induction motors.

squirrel-cage rotor is the rotating part of the common “squirrel cage” induction motor. It consists of a cylinder of steel laminations, with aluminum or copper conductors embedded in its surface. In operation, the non-rotating “stator” winding is connected to an alternating current power source; the alternating current in the stator produces a rotating magnetic field. The rotor winding has current induced in it by the stator field and produces its own magnetic field. The interaction of the two sources of the magnetic field produces torque on the rotor.

An induction motor is an AC electric motor in which the electric current in the rotor needed to produce torque is obtained by electromagnetic induction from the magnetic field of the stator winding.[1] An induction motor can, therefore, be made without electrical connections to the rotor.[a] An induction motor’s rotor can be either wound type or squirrel-cage type.(Wikipedia)

Elementary six-wire three-phase alternator, with each phase using a separate pair of transmission wires.

A rotating magnetic field is a magnetic field that has moving polarities in which its opposite poles rotate about a central point or axis. Ideally, the rotation changes direction at a constant angular rate. This is a key principle in the operation of the alternating-current motor.

Three phase variable reluctance motor – Tesla patent 381,968 filed Oct 12, 1887

Here I would like to conclude my post with the powerful image of the Niagara Falls. So let’s try to imagine the impression you could receive in front of the expansion of the waters that are moving the dome!!! that should only be the angels’ seashore. Bye, bye, my reader.

## Latitude, Longitude, the UN flag

Above: The UN Flag

Below: A geographical Earth image viewed above the North Pole

Latitude and longitude are the geographic coordinates that specify the position of a point on the Earth’s surface. In this post, you will find the reasons why each degree in the latitude on the earth and each degree of longitude at the Capricorn Tropic are reckoned to measure 111 kilometers. Moreover, I will add a deeper explanation into the meaning of the United Nations flag.

So, longitude, on a perfect sphere, as well as latitude has an extension of 111 kilometers for each of its 360 degrees but I don’t think everybody knows what is the geometrical reasoning to follow in order to explain why. This will prove to be a somewhat lateral way of thinking.

Up to now, nobody could explain in an incontrovertible way things like the universe, the dome, the stars, matter, antimatter, time and so on. As a consequence, inside this blog, there are many parts where I try making some hypothesis that, for now, cannot yet be considered as rigorous and scientifically based.

From my part, about many essential topics, I have elaborated intuitions that are intended to give an answer to many of the questions people sometimes ask. These explanations are partly scientific and partly not yet. But I’m sure that in the future rigorous answers will emerge. So, please, allow me to continue this somewhat amazing investigation.

### The physical dimensions of the dome

Anyway, by now, I would like to add some more notation about the physical and numerical dimension of the dome. How can it be reckoned? The radius reaching the external lining of the dome should be divided into different equal spaces. This can be done according to the original meaning of the Greek word στοιχεια,  already explained in the post you can find linked below. We can consider the radius of the cone of the sun, 6660km, as a unit for the layout of the dome. So, we divide the radius of the circle of the earth, 26640km, and obtain four different segments measuring each 6660km. Only at this point, 26640 kilometers far from the geographical north pole, we can say we have reached the dome. There is the starting point of the real internal lining of the dome, 6660km thick. That is what was known by the ancient astronomers as the Primum Mobile, about which I’ve written in my last article, Primum Mobile and Empyrean 22/09/2017.

### The rings inside the shield of the United Nations.

Here I would like to spend a few more words about the logo of the United Nations. First of all, you will notice the fact that the shield has been divided into five rings, the same way exactly we can imagine to be the architectural layer division of the dome. Thus, the space sectors inside the total radius, starting from the geographical north pole, will result to be:

• 6660km, up to the tropic of Capricorn.
• 13320km, up to the tropic of Cancer.
• 19980km, the earth radius up to the Antarctic.
• 26640km, up to the inner lining of the wall of the Dome, made of glass.
• 33300km, the complete radius of the Dome, up to the exterior lining of the first mobile.

Coming back to the UN flag, you can notice the presence of the two laurel branches all around the shield, somewhat like a sixth ring around the first mobile. It should be a space filled with electricity, immaterial, the place of lightning.

So, when you consider the extension of the dome on the earth, you should understand it reaches a diameter of 66.600Km, getting out of the walls of the earth platform of 6300km. See the article published on this blog the 7/04/2017  The wall on the cubic flat Earth

Please notice that it rotates at the astonishing speed of 8325km/h!!! That should be a sort of free movement, I mean, a movement starting in the void. So I would like to search for you, my reader, an answer to the previously suggested question: how can the layers of the dome move and win the friction that generates from the sliding movement of two differently working layers? Some powerful magnetic, anti-gravitic force should emanate from the immaterial void to nurture the dome rotation… To understand something about this sort of movement, let’s think of new-generation transport systems like Hyperloop, Vactrain (a neologism for vacuum train) or MagLev for instance.

### Longitude and Latitude

Now, let’s reckon a bit about some other point. The extension in degrees for each parallel on the earth is calculated to be 111km. How can this number be obtained? Please follow this reasoning.

(6660X6)=39960km

That is the extension of the circumference of the earth at the Tropic of Capricorn. We consider, of course, that Pi equals 3 as I have already explained in a previous post. Let’s remember that the year in the Bible is reckoned to be 360 days.

(39960:360)=111km.

That is the extension in kilometers for each degree in the latitude of the earth. But, of course, average people consider the earth as a ball. Now, in this reasoning, I’d like to follow my way. So, I don’t want to take into consideration the fact that the earth is not thought to be a perfect sphere. Following this line, each degree in longitude should, as well, have the same extension. A degree in latitude or in longitude should have the same extension, 111 kilometers. So each of the meridians that split the Capricorn Tropic into 360 equal parts has a measure of 111 kilometers. This sort of reasoning makes me believe that people designing the flag of the United Nations were deep in the knowledge of the real layout of our earth. It is also the sort of rigorous reasoning proving we are going the right direction.

### The growing extension of meridians

Now let’s consider the growing of each meridian of the earth as you move away from the Northern center.

1)  111km, the extension of one degree of longitude at the Capricorn Tropic.

2)  222km, the extension of one degree of longitude at the Tropic of Cancer.

3)  333km, the extension of one degree of longitude at the Antarctic.

4)  444km,  the extension of one degree of longitude at the interior lining of the wall of the

First   Mobile.

5)  555km,  the extension of one degree of longitude at the exterior lining of the wall of the

First Mobile.

### A join point between six and five

This last result, that is to say, the 555 kilometers of the extension of one degree of longitude at the exterior lining of the wall of the first mobile, could be considered as a joint point between two digits, 66600 and 555. Why?

33300×6=199.800km

That result corresponds to the measure in kilometers of the circumference of the exterior and furthermost lining of the dome.

199800:39960=5

That result equals 5 times the measure of the flat earth circumference diameter.

So, please, notice that the circumference of the external lining of the wall of the moving dome is five times the earth diameter

26640×6=159.840km

That result corresponds to the circumference of the inner lining of the wall of the primum mobile.

Now let’s keep on in the same line of reasoning.

159.800:39960= 4 times the earth diameter

19980×6 =119880km circumference of the earth at the Antarctic.

119880:39960=3 times the earth diameter.

13320×6=79920km

The result corresponds to the circumference of the earth at the tropic of Capricorn

79920:39960=2 times the earth diameter.

6660×6=39960

That corresponds to 1 time the earth diameter.

It means that at the tropic of cancer the tropic circumference equals the earth diameter.

### Some analogy between the layers of the earth and the atom energy levels.

To conclude, I would like to compare the layout of the flat earth circle to the layout of the different energy levels inside the single atoms. Please, look at the picture below. You can notice a similar frame that repeats in all the universe, from the biggest to the smallest elements or στοιχεια.

Picture of De Broglie’s  five energy levels of a Hydrogen atom. You could perceive the analogy with the rings inside the atom and the rings representing the different layers found in the architectural layout of the earth.

Now, let’s go back to the United Nation’s flag. Besides the rings, the flag is divided into 8 sectors. Why? This will be one of the interrogatives to be considered inside my new post, another week. So, bye, bye my reader. See you later and thank you.

## Graphene, metamaterials and autopiloting in the moving dome

(The picture on the cover represents Townsend Brown’s gravitator)

Today let’s speak again about graphene. It is a fantastic metamaterial that deserves further study.

## Metamaterials

A metamaterial (from the Greek word μετά meta, meaning “beyond”) is a material engineered to have a property that is not found in nature. They are made from assemblies of multiple elements fashioned from composite materials such as metals or plastics. The materials are usually arranged in repeating patterns, at scales that are smaller than the wavelengths of the phenomena they influence. Metamaterials derive their properties not from the properties of the base materials, but from their newly designed structures. Their precise shapegeometrysizeorientation, and arrangement gives them their smart properties capable of manipulating electromagnetic waves: by blocking, absorbing, enhancing, or bending waves, to achieve benefits that go beyond what is possible with conventional materials.(Wikipedia)

## Graphene and its properties

Graphene is obtained synthetically from graphite and is made of a single mono-atomic layer of carbon. It has the mechanical strength of diamond and the flexibility of plastic. Cables made of graphene boast a strength at least one hundred times greater than that of steal. A thin wire of just a millimeter diameter could drag the weight of  Boeing 747, which is something absolutely astonishing.

The particular disposition of the atoms of carbon and of their bonds gives a strength and flexibility allowing a stretching up to 20% more than its original dimension. It is an excellent conductor of heat thanks to its low electrical resistivity. It is the material with the absolute lowest resistivity, lower than silver or copper.

It is an indestructible material with special abilities. For instance, a team of researchers from the Berkeley University has created, thanks to graphene, the first prototype of an invisibility cloak.

Australian researchers have presented the invention of a new technology using graphene oxide to project 3D holographic images exceptionally realistic. By modifying the index of refraction the light is diverted in order to generate a three dimensions image seeming to float in the space over the display.

By using nanotechnologies on newly engineered materials, scientists can obtain the ability to self-assembly, to self-cleaning, capacity for regeneration, thermal and electrical modulated conductivity,  super strength, super stickiness and water repellency.

These meta-materials are so the ideal to build extraordinary electronic and electromechanical nanosystems, super nanoconductors, super batteries, ultra-thin computers with ultra resistant and foldable displays, energy transducers, nanoporous materials, intelligent materials and so on.

## Graphene and special capacitors

Scientists have produced special capacitors by using graphene layers alternated with a sort of hydro-gel that constitutes the dielectric. The layers of the dome could be made thus in such a way to have a lot of capacitor plates of graphene alternated with a layer made of a hydrogel in order to create very high tensions.

Why should we make the hypothesis that these layers form a very powerful capacitor?

In the book “Secrets of antigravity propulsion” by LaViolette, we can read about the experiments of Thomas Townsend Brown:

“After additional experiments, Brown eventually developed an electric capacitor device that he termed a gravitator (or, alternately, gravitor). These units were very heavy. One version consisted of  a wooden box, 2 feet long and 4 inches square, that contained a series of massive, electrically conductive plates made of lead and separated from one another by electrically insulating sheets of glass, which served as the capacitor’s dielectric medium (a dielectric is a substance that does not conduct  electric current). Another version used a dielectric molded from a mixture of lead monoxide and beeswax encased in Bakelite. The diagram in the figure above the page which is reproduced from Brown’s 1928 patent,  shows yet another version made with aluminum plates and paraffin. When energized with up to 150,000 volts of direct current (DC) Brown’s gravitator developed a thrust in the direction of its positively charged end.

One such gravitator, which weighted 10 kilograms, was observed to generate a maximum thrust of 0.1 kilogram (1 newton), a force equal to about 1 percent of its weight. When oriented upright on a scale and energized, it proceeded to gain or lose that amount of weight depending upon how the charge polarity was applied. it became lighter when its positive end faced up and heavier when its negative end faced up.”

Thomas Brown has played a leading role in many very strange and classified experiments, involving electrogravitics. There will be occasions, in the future, to talk again about this subject.

However, we should remember we live inside a very powerful capacitor that is the dome. The electrogravitic effect could act on the movable layers that acquire a thrust, levitate and move.

## Autopiloting

So, the dome is moving. That should be a sort of free movement, I mean, a movement developing in the void. So I would like to search with you, my reader, an answer to the previously suggested question: how can the layers of the dome move and win the friction that generates from the sliding movement of two differently working layers? Some powerful magnetic, antigravitic force should emanate from the immaterial void to nurture the dome rotation… To understand something about this sort of movement, let’s think of new-generation transport systems like Hyperloop, Vactrain (a neologism for vacuum train) or MagLev for instance.

In 2005,  Elon Musk, the owner of Tesla cars, an American house car, has introduced a software allowing his cars of the S series to auto-pilot. The Tesla auto-pilot system makes use of the Autosteer algorithm with infra-red sensors, ultrasonic long distance devices set into the bumpers, cameras, radars, precision GPS. The ensemble of these electronic devices allows to correctly detect the position of any moving or stationary body to be found on the road. The software is prepared to distinguish things, animals or persons as well as any sort of vehicles in circulation.

And for now, that’s enough. So I greet my reader only by introducing something about my next post on the blog. In fact, you will be able to find something more about the dome dimensions in connection with the ONU flag and its intrisec meaning. Bye, Bye.

## Architecture over the flat earth-The dome part 3

(The image on the cover is  a vertical section or lateral view of the flat earth with its underground layout  and the upper dome different layers.)

### Architecture of the dome: a brief summary

Architecture is necessary to build a cupola. I have already touched, and more than once,  the theme of a dome over the flat earth. First of all, we have proved the necessity of a solid vault to hold back the atmosphere. Without it,  the atmosphere would diffuse in the empty space of the cosmos. We have actually given evidence of the fact that the atmosphere gets stratified because of the presence of a ceiling. It stops the lighter gases from dispersing in the outer space.

In the second part of my discussion, I have considered the fact that the Dome and the Earth constitute the two plates of an enormous capacitor. This is a system charged with chemical reactions between the Earth components (for instance iron and silicates) and the graphene and silicates of the dome. The electrolyte will be performed by the sea water.

In this third session, I want to investigate some more characteristics of the dome. I hope that all these new ideas will become stronger and better defined in the course of time. Since the beginning of this inquiry, two years ago, incredible ideas have grown up being implemented by always new incoming concepts. In this way, as a consequence, you will find on this blog a continuously updated description of the flat earth. On the other hand,  on the net, the same description still appears to be extremely nebulous and fragmentary. We intend to suggest always more detailed hypothesis of how the real shape of the Earth and of the Dome can be designed.

### Some important question

We want, now, to give an answer to some important question:

-If a division between waters is made possible by the existence of a vault, how can we describe the whole geometric, architectural system of the dome?

– Is the dome rotating? Of course, it is, but what enables it to avoid the terrible friction that such a big spinning could transmit to the Earth?

– If stars are all inside the dome, how could we explain the fact that spectroscopy measures different distances for each star?

### The geometry of the dome

Let’s consider now the geometry of the dome. In the article “The seven pillars and foundations outside our earthly ponds”, we have discussed a solid hemispherical basin. It is a solidity able to contain the continents and the waters of the oceans. Its diameter has to be 26640km long and  6660km thick. For sure, in the future, we’ll have to understand what is the role of this basin in sustaining the magnetic field of the earth.

We can imagine, thus, that the upper dome is a very similar but inverted hemispheric basin. It will be made of different materials and positioned as a cover in the upper part of the earth. The consequent idea is that of a sphere, made up of two hemispheres, one of the silicates downward and one another of silicates and graphene upward. The earth is a plane in the middle.  In the same time, we can think of a chalice that grows up from the basin below to retain the upper waters. They could be contained in a sort of inter-space between the stationary dome made of glass and the first mobile.

### Architecture made of  two glasses

It is like having a smaller glass inside a bigger one, as in the picture.

Here you can imagine a basin reinforced by six lateral columns giving strength to the external container of the waters. Can you remember the seven columns of Proverbs 9:1? ” Wisdom has built her house; she has hewn her seven pillars.” English Standard Version. In architecture, you should talk of a cupola reinforced by six pendentives.

Where could be set the seven pillars? The seventh of them should obviously be set inside the center of the earth, at the geographical north pole, while the other six can be imagined as the vertexes of an imaginary hexagonal geometric figure. Each column should have a 9 kilometers diameter. This will be a consequence of the particular geometry of the platform. The crystal dome is on top. You should imagine the bigger glass as being a hemisphere covering the “Bucket”. You could try to verify the validity of my hypothesis by using two different glasses and performing the experiment. You could notice the fact that the smaller glass is able to seal the waters below, separating them from the waters above.

So, in my imagination, I couldn’t think to the waters as suspended over the entire platform of the Earth but rather contained in special interspaces. The internal glass contains the Earth and the lower waters while the bigger bucket contains the upper ones, as in an inter-space between two rings, one is a stationary layer maybe made of glass, pure radiance of light, and the other is a mobile crystal dome filled with stars. The smaller glass is the inner, solid wall of the dome that makes, upstairs, a division between the two waters.

The magnetic, gaseous, aeriform column on the northern pole could be the opening the Bible mentions in Genesis 7:11 “On that day all the springs of the great deep burst forth, and the floodgates of the heavens were opened”. (New International Version). It’s just there that I have imagined being set the pearl-gates mentioned in Revelation 21:21 and considered in my last week article on the blog.

### Architecture and many wonders inside a bucket

You should certainly remember what Isaiah 40:15 states: “Surely the nations are like a drop in a bucket…”, and there the prophet seems to refer to our cosmos as a container filled with waters.

So, for now, we have finally tried to show the possible geometry of the system. (By the way, here the implicit science is known as geodesy.) Moreover, let’s say something about the rotation of the dome. The stars rotate with a speed similar to that of the sun, only about one degree faster each day. While the sun performs a complete round in 24 hours, the dome performs it in  23h 56′.  As a consequence, when supposing the stars as nested in the dome, we have to conclude that the dome rotates.

The first objection you will think, however, is that, if the external glass rotates, it could be difficult to seal the upper waters. But we really need to avoid their flowing inside of the dome, flooding the earth. Moreover,  we have to consider that the stars rotate and that stars do not all appear at the same distance in the thickness of the dome. So, let’s try some hypothesis. We could consider the dome as composed by different hemispherical layers.

Let’s say  there are two main layers, the interior one made up of glass, pure irradiation of light, stationary, forming the internal structure of the dome and one exterior, outside the furthermost extremity of the earth, auto-moving (as it would have an automatic pilot incorporated), made of crystal,  and nestled with stars.

Anyway, one of these main layers should be fixed to the Earth. It would constitute the structure that seals the Earth, avoiding the upper waters to flood it. To say something more, the second layer should be moving and filled with stars. How can this external layer move, winning the friction that generates from the different status of the two layers that are not working in the same way, that is to say, one is moving and one is stationary? Remember the internal space made up of waters and obviously much more else(graphene, hydrogel, etc.). What is then the cause of the movement?

With this bewildering question in the mind, I leave here my reader. Let’s say goodbye with a song. Bye, bye, my reader, so long goodbye.

SO LONG GOODBYE (sum 41)

Time passes by, direction unknown
You’ve left us now, but we’re not alone
Before you know it your cups overflown
You measured no one that I’ve ever known

And it’s quite alright
And goodbye for now
Just look up to the stars
And believe who you are
‘Cause it’s quite alright
And so long, goodbye

We always knew that it’d come to this
It’s times like these I forget what I miss
Matters of heart are hard to address
Especially when yours is full of emptiness

## Primum Mobile and Empyrean

Fantasy or fiction writers have always searched  to guess what are the laws governing the celestial vault. Since the remote antiquity, hypothesis were made about a moving dome. Anyway, there is a reliable masterpiece, well known all over the world,  which can help us in understanding more. In the Bible, concerning the new Jerusalem, a living temple, – and temples are always connected to our cosmos -, you can read: Read more